在許多領域，多槽清洗機可以用來清洗物品，因?yàn)榍逑春蟮奈锲繁仁謩?dòng)清洗干凈。然而，為了獲得更好的清洗質量，除了按照要求操作各種程序外，我們還需要了解使用多槽清洗機的注意事項。下面我們將介紹使用多槽清洗機的注意事項以及定制事項。

In many fields, multi tank cleaning machine can be used to clean items, because the cleaned items are cleaner than manual cleaning. However, in order to obtain better cleaning quality, in addition to operating various procedures as required, we also need to understand the precautions for using multi tank cleaning machine. Next, we will introduce the precautions and customization of using the multi tank cleaning machine.

在使用多槽式超聲波清洗機清洗一些較小的零件物品時經常需要使用清洗筐，但是清洗筐上的網眼會引起超聲衰減，所以要特別引起注意，注意選擇網眼大小合適的清洗籃，此外建議選用不銹鋼材質的清洗籃，盡量不要使用塑膠框，這樣能夠防止靜電的產生。

When using the multi slot ultrasonic cleaning machine to clean some small parts and articles, it is often necessary to use the cleaning basket, but the mesh on the cleaning basket will cause ultrasonic attenuation, so special attention should be paid to the selection of the cleaning basket with the appropriate mesh size. In addition, it is recommended to select the cleaning basket made of stainless steel and try not to use the plastic frame, so as to prevent the generation of static electricity.

通常在清洗時每道工序的時間定為三五分鐘，如果被清洗物品的表面積比較大，或者工件的結構較為復雜時，要注意根據實際情況酌情調整多槽式超聲波清洗機的清洗時間。若被清洗物容易出現重疊以及粘附的現象，那么在將被清洗物放入及取出槽液的時候可以抖動一下工件，讓清洗劑充分與工件接觸以提高清洗效果。

Usually, the time of each process is set at three to five minutes during cleaning. If the surface area of the cleaned object is relatively large or the structure of the workpiece is complex, pay attention to adjust the cleaning time of the multi slot ultrasonic cleaning machine according to the actual situation. If the cleaned objects are prone to overlap and adhere, the workpiece can be shaken when the cleaned objects are put into and taken out of the tank liquid, so that the cleaning agent can fully contact the workpiece to improve the cleaning effect.

用多槽式超聲波清洗機清洗工件要注意槽液不能加得太滿，以免發生兩槽超聲波清洗劑之間相互混合以及瀝干時清洗筐底部黏液的現象。此外，多槽式超聲波清洗機的每個槽應為獨立的操作工序，注意不要將兩槽清洗劑相互串用或人為減少操作工序以及清洗的操作時間。

When cleaning the workpiece with a multi tank ultrasonic cleaner, pay attention to that the tank liquid cannot be filled too full, so as to avoid mixing between the two tanks of ultrasonic cleaner and cleaning the mucus at the bottom of the basket when draining. In addition, each tank of the multi tank ultrasonic cleaning machine should be an independent operation process. Pay attention not to use the two tanks of cleaning agents in series with each other or artificially reduce the operation process and cleaning operation time.

山東超聲波清洗機廠家提醒您，定制多槽清洗機有一些需要注意的事項，要了解工件的尺寸，一次清洗的數量，以此來決定單個清洗槽的尺寸，這是為重要的一點；其次，工件處于生產流程的哪一個環節，是全新的還是返修的，是處于中間流程還是尾流程，這些決定了多槽清洗機的工藝配置。

Shandong ultrasonic cleaning machine manufacturer reminds you that there are some matters needing attention in customizing the multi tank cleaning machine. It is important to understand the size of the workpiece and the number of cleaning at a time, so as to determine the size of a single cleaning tank; Secondly, the process configuration of the multi tank cleaning machine is determined by which part of the production process the workpiece is in, whether it is new or repaired, whether it is in the intermediate process or the final process.

如是否要配備循環過濾系統、是否需要分油器等等。所謂循環過濾就是在清洗過后的漂洗槽中水不斷循環，這樣可以達到佳漂洗效果，而分油器就是將工件中的油污分離出來，這樣的清洗效果要更好。

Such as whether to equip with circulating filtration system, whether to need oil separator, etc. The so-called circulating filtration refers to the continuous circulation of water in the rinsing tank after cleaning, so as to achieve a good rinsing effect, and the oil separator is to separate the oil stains in the workpiece, so the cleaning effect is better.

定制清洗機時提供的參數越詳細就越有利于定制合適的設備，當然在使用之前建議是了解該設備的相關信息越多越好，這樣才能更好更順利的進行操作，您可以關注網站cmicroentropy.com進行咨詢。

The more detailed the parameters provided when customizing the cleaning machine, the more conducive it is to customize the appropriate equipment. Of course, it is recommended to understand the more relevant information of the equipment before use, so as to operate better and smoothly. You can follow the website cmicroentropy.com for consultation.