1、 Choose the appropriate cleaning agent

通過式清洗機是通過在循環系統中使用清洗劑來清洗工件的。因此，選擇合適的清洗劑對保持清洗機的工作效率關重要。不同的清洗劑對不同的工件有不同的清洗效果，不同的清洗劑也具有不同的酸堿度和揮發性。因此，在使用通過式清洗機之前，需要確定要清洗的工件的類型，并選擇適合的清洗劑。

A through type cleaning machine cleans workpieces by using cleaning agents in a circulating system. Therefore, selecting the appropriate cleaning agent is crucial for maintaining the efficiency of the cleaning machine. Different cleaning agents have different cleaning effects on different workpieces, and different cleaning agents also have different acidity, alkalinity, and volatility. Therefore, before using a through type cleaning machine, it is necessary to determine the type of workpiece to be cleaned and select a suitable cleaning agent.

二、控制清洗溫度

2、 Control cleaning temperature

通過式清洗機在工作時，需要調整清洗液的溫度，以確保其能夠有效地去除污垢和雜質。但在設置清洗液溫度時也需要注意，過高或過低的溫度都可能對清洗工件造成不良影響。因此，在使用通過式清洗機時，要確保清洗液處于合適的溫度范圍內，以防止工件被清洗的過于涼或過熱。

During operation, the temperature of the cleaning solution needs to be adjusted to ensure that it can effectively remove dirt and impurities. But when setting the temperature of the cleaning solution, it is also important to note that high or low temperatures may have adverse effects on the cleaning workpiece. Therefore, when using a through type cleaning machine, it is necessary to ensure that the cleaning solution is within the appropriate temperature range to prevent the workpiece from being too cold or overheated during cleaning.

三、控制清洗時間

3、 Control cleaning time

通過式清洗機的清洗時間也是有要求的。過短的時間會導致清洗不徹底，不能達到預期的潔凈效果；而過長的時間可能會損壞工件表面或造成浪費。因此，在使用清洗機器時，要合理地控制清洗時間，以達到清潔和的目的。

The cleaning time of the through type cleaning machine is also required. Too short a time can lead to incomplete cleaning and failure to achieve the expected cleaning effect; Long periods of time may damage the surface of the workpiece or cause waste. Therefore, when using a cleaning machine, it is necessary to control the cleaning time reasonably to achieve the goal of cleaning and efficiency.

四、保持清洗機器清潔

4、 Keep the cleaning machine clean

通過式清洗機需要經常進行清洗和維護。如果沒有及時清洗和維護，它會逐漸積滿污垢，減緩清洗速度，甚影響清洗效果。因此，在使用通過式清洗機時，需要定期對清洗機進行清洗和維護，積累的污垢和顆粒等雜質，確保設備正常工作。

Through type cleaning machines require frequent cleaning and maintenance. If not cleaned and maintained in a timely manner, it will gradually accumulate dirt, slow down the cleaning speed, and even affect the cleaning effect. Therefore, when using a through type cleaning machine, it is necessary to regularly clean and maintain the cleaning machine to remove accumulated impurities such as dirt and particles, and ensure the normal operation of the equipment.

五、注意清洗機的性

5、 Pay attention to the safety of the cleaning machine

通過式清洗機在清洗工件時會使用各種化學物質和油類，而這些物質可能造成損傷或污染。因此，在使用該設備時，需要嚴格遵守清洗機的規定，確保工作場所的。此外，工作人員還需戴好防護手套、面罩等防護設備，以避免對身體造成損傷。

Through type cleaning machines use various chemicals and oils when cleaning workpieces, which may cause damage or pollution. Therefore, when using this equipment, it is necessary to strictly follow the safety regulations of the cleaning machine to ensure the safety of the workplace. In addition, workers also need to wear protective gloves, masks, and other protective equipment to avoid damage to their bodies.

本文由通過式噴淋清洗機整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊： http://cmicroentropy.com我們會有更多精彩內容等你查看。

This article is organized and published by a spray cleaning machine. Do you have any understanding of these contents? For more information, please click on: http://cmicroentropy.com We will have more exciting content waiting for you to check out.