讓人焦頭爛額的工業模具清洗不是個簡單的工作，所以需要了解的事項有很多，下面我們就來看看超聲波清洗機可用于模具塑殼的清洗工作是怎樣的。

　　Burning industrial mold cleaning is not a simple job, so there are a lot of things to know, let's take a look at the ultrasonic cleaning machine can be used for mold molding case cleaning work is how.

　　像其他機械一樣，注塑模具也需要巨大的資金投入，這也意味著模具的保養和維護是非常重要的。所以，塑料注塑模具須要定期清潔，在不損壞工具的情況下，表面的上的所有沉積物以及通風口處的殘留塑料。

　　Like other machinery, injection moulds also require huge capital investment, which also means that mold maintenance and maintenance is very important. Therefore, plastic injection moulds need to be cleaned regularly to remove all sediment on the surface and residual plastic in the air vents without damaging the tools.

　　在模具廠，塑殼的清洗工作非常重要，因?yàn)闆](méi)有客戶想看到交付的產品是臟兮兮的。而塑殼產品通常都是大批量，如果靠人工一個個清洗，不僅效率低，而且清洗效果不理想，清潔度不高，這樣是很難讓客戶滿意的。

　　In the mold factory, the molding case cleaning is very important, because no customer wants to see the product delivered dirty. And plastic case products are usually large quantities, if you rely on manual cleaning one by one, not only low efficiency, but also the cleaning effect is not ideal, cleanliness is not high, it is difficult to satisfy customers.

　　而如果塑殼采用超聲波清洗機效果好得很，多槽式超聲波清洗機顧名思義，就是有多個槽，按照清洗的程度，可有幾個清洗槽清洗多次，并漂洗干凈，后還可以烘干或甩干，如果采用甩干則需要制作夾具。

　　And if the plastic case using ultrasonic cleaning machine effect is very good, multi-trough ultrasonic cleaning machine, as the name implies, is a plurality of grooves, according to the degree of cleaning, there can be several cleaning tank cleaning many times, and rinsing clean, and finally can also be dried or dry, if the use of drying is needed to make fixtures.

　　在清洗效果方面看，超聲波清洗主要是利用超聲波在液體中的空化作用、加速度作用及直進流作用對液體和污物直接、間接的作用，使污物層被分散、乳化、剝離而達到清洗目的。

　　In terms of cleaning effect, ultrasonic cleaning is mainly the use of ultrasonic in the liquid cavitation, acceleration and direct flow of liquid and dirt direct, indirect effect, so that the dirt layer is dispersed, emulsified, stripped to achieve the purpose of cleaning.

　　強度高頻率的超聲波在清洗液中產生氣蝕現象，使成千上萬個極細微的氣泡把污染物從模腔中剝落出來，能有效地清洗模腔中的死角，不會損傷模腔。

　　The intensity of high frequency ultrasonic in the cleaning liquid gas erosion phenomenon, so that tens of thousands of very fine bubbles to the pollutants from the mold cavity peeling out, can effectively clean the mold cavity in the dead Angle, will not damage the mold cavity.

　　從節省時間，成本方面看使用全自動超聲波清洗機可以使模具技術人員同時進行多項工作，當一些模具部件在超聲波設備中進行清潔時，工作人員可以清洗模具底座，這可以使得清洗工作更快并且可以保證生產更高質量的工件。

　　From the point of view of saving time and cost, the use of automatic ultrasonic cleaning machine can make mold technicians carry out multiple work at the same time. When some mold parts are cleaned in the ultrasonic equipment, the staff can clean the mold base, which can make the cleaning work faster and ensure the production of higher quality workpiece.

　　超聲波清洗機現在已經被廣泛應用到工業模具的清洗中了，所以如果您有什么問題沒的話，歡迎隨時來網站cmicroentropy.com進行咨詢。

　　Ultrasonic cleaning machine has now been widely used in the cleaning of industrial molds, so if you have any problems not solved, welcome to the website cmicroentropy.com for consultation.